Carbide Teeth Welded Timber Wood Work Sawmill Band Saw Carpentry Woodworking TCT Bandsaw Blades

Tags: Tct Band Saw Blade Hard Log Cutting Welding Tungsten Carbide Teeth Bandsaw Timber Mill Carbide Band Saw Blade High Performance Wood Work Log Sawing Sawmill TCT Bandsaw Timber Carpentry Carbide Tip Band Saw Blades

Price: $40.000

DETAILS

Product Introduction

* OEM & ODM Acceptable

	Horizontal	Vertical
Material	Tungsten Carbide	Tungsten Carbide
TPI	15-50mm	13-60mm
Application	Wood	Wood
Length	3500-12000mm	3500-15000mm
Thickness	0.7-1.5mm	0.7-1.67mm
Width	27-150mm	15-260mm
Kerf	1.3-3.0mm	1.3-3.2mm
Type	Woodworking	Woodworking
Note: Customized service available

Possible Problems & Solutions

PROBLEM :The surface of the cut board is uneven and deviates

REASON①: Deformation of the wheel surface

PREVENT/SOLVE①: the saw blade rubs against the wheel surface for a long time, and the wheel surface is not trimmed

REASON②: Rolling treatment is not good

PREVENT/SOLVE②: problems in the production of saw blades

REASON③: Angle mismatch

PREVENT/SOLVE③: production process problem, provide specific gravity of cut wood to production

REASON④: The knife

edge is not sharp

PREVENT/SOLVE④: it has not been ground for a long time

REASON⑤: Improper clamp (head) adjustment

PREVENT/SOLVE⑤:
excessive clamp clearance

PROBLEM: Saw Blade cracked

REASON①: Material Issues PREVENT/SOLVE①:Production Issues

REASON②:The knife edge is not sharp and the resistance is too large
PREVENT/SOLVE②:the single use time is determined according to different materials to be cut

REASON③:Tooth profile mismatch
PREVENT/SOLVE③:production problem

REASON④:Repair Grinding Cause PREVENT/SOLVE④:Incorrect Grinding

REASON⑤:Bad rolling handling
PREVENT/SOLVE⑤:production problem

REASON⑥:Improper blade cooling PREVENT/SOLVE⑥:not cooling properly, or not cooling the blade
properly

PROBLEM: Saw Blade break

REASON①: Material reason PREVENT/SOLVE①:production problem

REASON②:The knife edge is not sharp, and it has :been used for too long,
and the resistance is too large PREVENT/SOLVE②: grind it on time

REASON③:The saw blade is rubbing against the equipment
PREVENT/SOLVE③:adjust until the saw blade fits perfectly with the equipment

REASON④:Too much tension PREVENT/SOLVE④:choose the
corresponding tension according to the width and thickness of the saw blade

REASON⑤:The feed speed does not match

PREVENT/SOLVE⑤:according to the cutting of different wood, give the corresponding feed speed

REASON⑥:Human factors PREVENT/SOLVE⑥:wood ash not
cleaned in time, grinding is not precise enough, manual feeding speed is uneven, key parts of the machine are regularly lubricated

Packaging & Shipping